| 1. | Experiment study of aluminum electrolysis electrode prepared with slurry casting method
粉浆浇注法制备较大尺寸金属陶瓷材料的试验研究 |
| 2. | The main conclusions are read as follows : the process parameters of casting method were optimized
主要结论如下：确定了流涎法刮制平膜的最佳成膜工艺。 |
| 3. | Evaluates alternative manufacturing methodologies , including extrusion , machining , stamping and casting methods
对其他的制造方法进行评估，包括拉伸，机加工，冲压，铸造等。 |
| 4. | The specimens showing profuse branching of vessels and ducts in colour were prepared by a corrosion casting method
这些标本展示了色彩丰富的血管和导管分支，是通过腐蚀铸型技术造成的。 |
| 5. | The specimens showing profuse branching of vessels and ducts in colour were prepared by a corrosion casting method
这些标本展示了色彩丰富的血管和导管分支，是通过腐蚀铸型技术造成的。 |
| 6. | Using the diecast method , products with cleaner and more accurate dimensions can be produced than is the case with other casting methods
与其它浇注法比，通过拉模铸造制造的产品外观更美，尺寸更精确。 |
| 7. | In - situ ticp / fe composites were prepared by reaction cast method with induction heating , crucible smelting and covering agent
采用反应铸造的方法，利用感应加热、坩锅熔炼及使用覆盖剂保护，制备原位tic _ p fe复合材料。 |
| 8. | The box girders of the main bridge of wuhan tianxingzhou changjiang river rail - cum - road bridge were constructed by the girder casting method by three types of slide shuttering forms
摘要武汉天兴洲公铁两用长江大桥正桥箱梁使用了3种移动模架制梁法施工。 |
| 9. | The result showed that , by adopting appropriate casting method , a good metallurgical combination between tungsten particles and hi - cr alloyed cast iron could be obtained
结果表明，在适宜的铸造工艺条件下，碳化钨颗粒和高铬铸铁基体之间可以形成良好的冶金结合，铸渗效果较好。 |
| 10. | The strength of flat film made by casting method is only 55mpa , while that of tubular film made by blown - extrusion method is high to 250mpa and is 2 . 5 times strength of cellophane
刮膜法制备的平膜强度较低，而吹膜法制备的管膜强度达250mpa ，是玻璃纸的2 . 5倍，这与分子链的取向有关。 |
